4700D
FAR-Rated High Impact Resistant Decorative Design Sheet
Boltaron® 4700D expands design freedom for aircraft interiors with the broadest
range of custom decorative patterns and textures available in an FAR 25.853(a) rated
thermoplastic alloy sheet.
Characteristics
- Wide range of decorative patterns including carbon fiber, simulated fabrics, woodgrains, abstracts
- FAR 25.853(a) Compliance
- Excellent durability and impact strength
- Uniform high quality appearance
- Wall thickness integrity in deep draw forming
- Lot-to-lot color consistency
Uses
- Seat parts, arm rests
- Tray tables
- Passenger Service Units (PSUs)
- Video monitor shrouds
- Instrument panel housings
- Class dividers
- Bulkhead laminates
- Galley and lavatory components
- Bull noses, gap covers, moldings
- Window reveals
- Light housings
Performance Details
FAR Ratings
- FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass
- FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass
Properties
- Name Test Method Imperial Metric
- Specific Gravity ASTM D792 1.424
- Tensile Strength ASTM D638 5,300 psi 37 MPa
- Flexural Strength ASTM D790 8,700 psi 60 MPa
- Flexural Modulus ASTM D790 297,000 psi 2,050 MPa
- Izod Impact Notched ASTM D256 73°F 15.0 ft-lb/in 23°C 808 J/m
- Hardness Rockwell ASTM D785 106
- Heat Deflection Annealed ASTM D648 151°F @ 264 PSI 66°C @1.8 MPa
- Forming Temperature 335 - 370°F 168 - 188°C
- Drying Not required
- Heat Deflection (unannealed) ASTM D648 151°F @ 264 psi 66°C @ 1.8 MPa
- Typical Heater Settings 30 - 50% Top 50 - 70% Bottom
* Independent lab tests. All tests at 73 °F (23 °C) in dry conditions unless otherwise noted.
Sheet Sizes
- Name Imperial Metric
- Lengths 120 in 3,048 mm
- Widths 48 in to 1,220 mm
- Gauges from 0.028 to 0.250 in from .71 to 6.35 mm
- Custom Sizes Blank sizes, gauges on request