9815N
Next Generation UV Resistant FAR Rated High Impact Sheet for Aircraft Interiors
Boltaron® 9815N is a UV resistant material that meets the FAR 25.853 para (a) and (d) requirements for flammability, smoke and heat release for aircraft interiors.
Characteristics
- Provides outstanding durability and long service life
- Can be cleaned regularly with aviation cleaning products
- Safe to clean using UV-C disinfection
- Consistent, uniform high quality appearance
- Maintains wall thickness integrity in deep draw forming
- Available in a full range of colors, finishes
- Lot-to-lot color consistency
- Customizable in the industry’s widest collection of textures
Uses
- Instrument panel housings and air ducts
- Class dividers and bulkhead laminates
- Galley and lavatory components
- Bull noses, gap covers and moldings
- Aircraft seating components
Aircraft Interior Uses
- Aircraft seat shell
- Tray table
- Head rest
- IFE bezels and monitor shrouds
- Lavatory components
Performance Details
FAR Ratings
- FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass
- FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass
- FAR 25.853(d)(Part IV) (OSU Heat Release) (Peak - HRR, kW/m2 <65) (2 Min - HRR, kW min/m2 <65)
- FAR 25.853(d)(Part V) (NBS Smoke) (Ds Max <200)
Properties
- Name Test Method Imperial Metric
- Specific Gravity ASTM D792 1.46
- Tensile Strength ASTM D638 6,500 psi 44.8 MPa
- Flexural Strength ASTM D790 10,100 psi 69.6 MPa
- Flexural Modulus ASTM D790 409,000 psi 2,820 MPa
- Hardness Rockwell ASTM D785 106
- Heat Deflection Annealed ASTM D648 166 °F @ 264 PSI 74.4 °C @1.8 MPa
- Izod Impact Notched ASTM D256 3.26 ft-lb/in @73 F 174 J/m @23 C
- Gardner Drop Dart Impact GE geometry 640 in-lb 72 J
- Forming Temperature 335 - 360 °F 168 - 182 °C
- Mold Shrinkage 0.5 - 0.7%
- Typical Heater Settings (Top) 30 - 50%
- Typical Heater Settings (Bottom) 50 - 70%
- Pre-drying Not required
* Independent lab tests. All tests at 73 °F (23 °C) in dry conditions unless otherwise noted.
Sheet Sizes
- Name Imperial Metric
- Lengths to 120 in 3,048 mm
- Widths to 60 in 1,524 mm
- Gauges from 0.040 to 0.250 in from 1.02 to 6.35 mm
- Custom Sizes Blank sizes, gauges on request